ATTINY1616-MNRYour current position:Home > ATTINY1616-MNR
ATTINY1616-MNR
The ATtiny1616 is a microcontroller featuring the 8-bit AVR® processor with a hardware multiplier, running at up to 20 MHz, and with 16 KB Flash, 2 KB SRAM, and 128B of EEPROM in a 20-pin package. The series uses the latest Core Independent Peripherals with low-power features, including Event System, intelligent analog and advanced peripherals. The integrated QTouch® peripheral touch controller supports capacitive touch interfaces with proximity sensing and a driven shield.
ATtiny1616是一款微控制器,内置8位AVR处理器和硬件乘法器,工作频率最高可达20 MHz,在20引脚封装中集成16 KB Flash、2 KB SRAM和128B EEPROM。该系列使用具有低功耗特性的最新核心独立外设,包括事件系统、智能模拟和高级外设。集成的QTouch外设触摸控制器支持带有接近感测和驱动屏蔽的电容式触摸接口。
Product Features 产品特性
Hardware multiplier
Three sleep modes:
Idle
Standby
Power Down
Event System
Watchdog Timer (WDT)
Power-On Reset (POR)
Brown-Out Detection (BOD)
Single pin programming and debugging interface (UPDI)
Peripheral Touch Controller (PTC)
1x 12-bit Timers (TCD)
2x 16-bit Timer (TCA / TCB)
12 channels self-capacitance
36 mutual-capacitance buttons supported
SPI / I2C / USART
硬件乘法器 三种睡眠模式: 闲置的 备用的 断电 事件系统 看门狗定时器(WDT) 上电复位(POR) 掉电检测(BOD) 单引脚编程和调试接口(UPDI) 外围触摸控制器(PTC) 1个12位定时器(TCD) 2个16位定时器(TCA / TCB) 12通道自电容 支持36个互电容按钮 SPI / I2C / USART
Parametrics 参数化
Program Memory Type | Flash |
Program Memory Size (KB) | 16 |
CPU Speed (MIPS/DMIPS) | 20 |
Data EEPROM (bytes) | 256 |
Timers | 1 x 8-bit - 3 x 16-bit |
Stand alone PWM | 4 |
Number of ADCs | 2 |
ADC Channels | 16 |
Max ADC Resolution (bits) | 10 |
Number of Comparators | 3 |
Temp. Range Min. | -40 |
Temp. Range Max. | 125 |
Operation Voltage Max.(V) | 5.5 |
Operation Voltage Min.(V) | 1.8 |
Pin Count | 20 |
Low Power | Yes |
I2C | 1 -I2C |
16 | |
20 | |
256 | |
4 | |
2 | |
16 | |
10 | |
3 | |
-40 | |
125 | |
5.5 | |
1.8 | |
20 | |