KSZ8863MLL
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs in a small footprint.
They are designed to enable a new generation of low port count, cost-sensitive and power efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS features (e.g., IPv6 priority classification support) make these devices ideal for IPTV, IP-STB, VoIP, automotive and industrial applications.
The KSZ8863 family is designed to support the GREEN requirement in today’s switch systems. Advanced power management schemes include software power down, per port power down and the energy detect mode that shuts downs the transceiver when a port is idle. KSZ8863MLL/FLL/RLL also offer a by-pass mode, which enables system-level power saving. In this mode, the processor connected to the switch through the MII interface can be shut down without impacting the normal switch operation.
The configurations provided by the KSZ8863 family enables the flexibility to meet requirements of different applications:
KSZ8863MLL: Two 10/100BASE-T/TX transceivers and one MII interface.
KSZ8863RLL: Two 10/100BASE-T/TX transceivers and one RMII interface.
KSZ8863FLL: One 100BASE-FX, one 10/100BASE-T/TX transceivers and one MII interface.
The device is available in RoHS-compliant 48-pin LQFP package. Industrial-grade and Automotive-grade are also available.
ksz 8863ml/FLL/RLL是高度集成的小尺寸3端口开关IC。
它们旨在实现新一代端口数量少、成本敏感且高能效的10/100Mbps交换机系统。低功耗、高级电源管理和复杂的QoS特性(如IPv6优先级分类支持)使这些器件成为IPTV、IP-STB、VoIP、汽车和工业应用的理想之选。
KSZ8863系列旨在支持当今开关系统的绿色要求。高级电源管理方案包括软件关断、每个端口的关断以及当端口空闲时关断收发器的电能检测模式。ksz 8863ml/FLL/RLL还提供旁路模式,可实现系统级省电。在这种模式下,可以关闭通过MII接口连接到交换机的处理器,而不会影响交换机的正常运行。
KSZ8863系列提供的配置能够灵活满足不同应用的需求:
KSZ8863MLL:两个10/100BASE-T/TX收发器和一个MII接口。
KSZ8863RLL:两个10/100BASE-T/TX收发器和一个RMII接口。
KSZ8863FLL:一个100BASE-FX、一个10/100BASE-T/TX收发器和一个MII接口。
该器件采用符合RoHS标准的48引脚LQFP封装。还提供工业级和汽车级产品。
Product Features 产品特性
Parametrics 参数化
Ethernet Bandwidth | 10/100Mbps |
Interrupt Pin | Yes |
Op Voltage | 3.3 |
Interface | MII / RMII |
IEEE1588 | No |
Temp Range Min | -40 |
Temp Range Max | 85 |
Managed | Yes |
Copper Support | 10/100 (2) |
Fiber Support | 100FX (1) |
Supply Voltage (V) | 3.3 |
Internal LDO | Yes |
Vdd I/O (V) | 1.8/2.5/3.3 |
LinkMD Cable Diag | Yes |
Repeater Mode | No |
On-Chip Termination | No |
ESD Rating (KV) | 4KV |
WOL | No |
Largest Pkt-Size Bytes | 1916 |
IPV6 | Yes |
Flow Ctrl | Yes |
Rate Limiting | Yes |
Rapid Spanning Tree | Yes |
Static MAC Addr | Yes |
以太网带宽 | 10/100Mbps |
中断引脚 | 是 |
工作电压 | 3.3 |
连接 | MII / RMII |
IEEE1588 | 不 |
最小温度范围 | -40 |
最大温度范围 | 85 |
管理 | 是 |
铜支架 | 10/100 (2) |
纤维支架 | 100外汇(1) |
电源电压(V) | 3.3 |
内部LDO | 是 |
Vdd输入/输出(V) | 1.8/2.5/3.3 |
LinkMD电缆诊断 | 是 |
中继器模式 | 不 |
片上终端 | 不 |
ESD额定值(KV) | 4KV |
WOL | 不 |
最大Pkt大小的字节 | 1916 |
IPV6 | 是 |
流量控制 | 是 |
限速 | 是 |
快速生成树 | 是 |
静态MAC地址 | 是 |
KSZ8863MLL
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs in a small footprint.
They are designed to enable a new generation of low port count, cost-sensitive and power efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS features (e.g., IPv6 priority classification support) make these devices ideal for IPTV, IP-STB, VoIP, automotive and industrial applications.
The KSZ8863 family is designed to support the GREEN requirement in today’s switch systems. Advanced power management schemes include software power down, per port power down and the energy detect mode that shuts downs the transceiver when a port is idle. KSZ8863MLL/FLL/RLL also offer a by-pass mode, which enables system-level power saving. In this mode, the processor connected to the switch through the MII interface can be shut down without impacting the normal switch operation.
The configurations provided by the KSZ8863 family enables the flexibility to meet requirements of different applications:
KSZ8863MLL: Two 10/100BASE-T/TX transceivers and one MII interface.
KSZ8863RLL: Two 10/100BASE-T/TX transceivers and one RMII interface.
KSZ8863FLL: One 100BASE-FX, one 10/100BASE-T/TX transceivers and one MII interface.
The device is available in RoHS-compliant 48-pin LQFP package. Industrial-grade and Automotive-grade are also available.
ksz 8863ml/FLL/RLL是高度集成的小尺寸3端口开关IC。
它们旨在实现新一代端口数量少、成本敏感且高能效的10/100Mbps交换机系统。低功耗、高级电源管理和复杂的QoS特性(如IPv6优先级分类支持)使这些器件成为IPTV、IP-STB、VoIP、汽车和工业应用的理想之选。
KSZ8863系列旨在支持当今开关系统的绿色要求。高级电源管理方案包括软件关断、每个端口的关断以及当端口空闲时关断收发器的电能检测模式。ksz 8863ml/FLL/RLL还提供旁路模式,可实现系统级省电。在这种模式下,可以关闭通过MII接口连接到交换机的处理器,而不会影响交换机的正常运行。
KSZ8863系列提供的配置能够灵活满足不同应用的需求:
KSZ8863MLL:两个10/100BASE-T/TX收发器和一个MII接口。
KSZ8863RLL:两个10/100BASE-T/TX收发器和一个RMII接口。
KSZ8863FLL:一个100BASE-FX、一个10/100BASE-T/TX收发器和一个MII接口。
该器件采用符合RoHS标准的48引脚LQFP封装。还提供工业级和汽车级产品。
Product Features 产品特性
Parametrics 参数化
Ethernet Bandwidth | 10/100Mbps |
Interrupt Pin | Yes |
Op Voltage | 3.3 |
Interface | MII / RMII |
IEEE1588 | No |
Temp Range Min | -40 |
Temp Range Max | 85 |
Managed | Yes |
Copper Support | 10/100 (2) |
Fiber Support | 100FX (1) |
Supply Voltage (V) | 3.3 |
Internal LDO | Yes |
Vdd I/O (V) | 1.8/2.5/3.3 |
LinkMD Cable Diag | Yes |
Repeater Mode | No |
On-Chip Termination | No |
ESD Rating (KV) | 4KV |
WOL | No |
Largest Pkt-Size Bytes | 1916 |
IPV6 | Yes |
Flow Ctrl | Yes |
Rate Limiting | Yes |
Rapid Spanning Tree | Yes |
Static MAC Addr | Yes |
以太网带宽 | 10/100Mbps |
中断引脚 | 是 |
工作电压 | 3.3 |
连接 | MII / RMII |
IEEE1588 | 不 |
最小温度范围 | -40 |
最大温度范围 | 85 |
管理 | 是 |
铜支架 | 10/100 (2) |
纤维支架 | 100外汇(1) |
电源电压(V) | 3.3 |
内部LDO | 是 |
Vdd输入/输出(V) | 1.8/2.5/3.3 |
LinkMD电缆诊断 | 是 |
中继器模式 | 不 |
片上终端 | 不 |
ESD额定值(KV) | 4KV |
WOL | 不 |
最大Pkt大小的字节 | 1916 |
IPV6 | 是 |
流量控制 | 是 |
限速 | 是 |
快速生成树 | 是 |
静态MAC地址 | 是 |