AT86RF233-ZUR
Feature rich, low-power 2.4GHz transceiver designed for industrial and consumer IEEE 802.15.4-2006/2011, zigbee, SP100, WirelessHART, ISM, and high data rate applications. It is a true SPI-to-antenna solution providing a complete radio transceiver interface between the antenna and the microcontroller.
It comprises the analog radio transceiver and the digital demodulation including time and frequency synchronization, and data buffering. All RF-critical components are integrated on a single chip minimizing the number of required external components to the antenna, crystal and decoupling capacitors. The bidirectional differential antenna pins, used for transmission and reception, eliminate the need for an external antenna switch.
An internal 128 byte RAM buffers transmit and receive data. Two on-chip low dropout (LDO) voltage regulators provide the internal analog and digital 1.8V supply.
功能丰富的低功耗2.4GHz收发器，设计用于工业和消费类IEEE 802.15.4-2006/2011、zigbee、SP100、WirelessHART、ISM和高数据速率应用。这是一款真正的SPI至天线解决方案，在天线和微控制器之间提供完整的无线电收发器接口。
它包括模拟无线电收发器和数字解调，包括时间和频率同步以及数据缓冲。所有RF关键元件都集成在一个芯片上，从而最大限度地减少了天线、晶体和去耦电容所需的外部元件数量。双向差分天线引脚用于发射和接收，无需外部天线开关。
内部128字节RAM缓冲器用于发送和接收数据。两个片内低压差(LDO)稳压器提供内部模拟和数字1.8V电源。
Product Features 产品特性
- High Performance RF-CMOS 2.4GHz radio transceiver targeted for IEEE® 802.15.4, zigbee®, RF4CE, 6LoWPAN, and ISM applications
- Receiver sensitivity -101dBm
- Programmable TX output power from -17dBm up to +4dBm
- Ultra-low current consumption: 0.02µA in deep sleep mode
- Ultra-low supply voltage (1.8V to 3.6V) with internal regulator
- Support for coin cell operation
- Optimized for low BoM Cost and ease of production: few external components necessary
- Easy to use interface
- Industrial and extended temperature range: -40C to +85C and -40C to +125C
- I/O and packages: 32-pin QFN package, 5 x 5 x 0.9mm3
- Compliant to EN 300 328/440, FCC-CFR-47 Part 15, ARIB STD-66, RSS-210
- Compliant to IEEE 802.15.4 2003/2006/2011
- 高性能RF-CMOS 2.4GHz无线电收发器，针对IEEE 802.15.4、zigbee、RF4CE、6LoWPAN和ISM应用而设计
- 接收器灵敏度-101dBm
- 可编程TX输出功率范围为-17dBm至+4dBm
- 超低功耗:深度睡眠模式下为0.02 A
- 内置调节器的超低电源电压(1.8V至3.6V)
- 支持硬币电池操作
- 针对低BoM成本和易于生产进行了优化:几乎不需要外部组件
- 易于使用的界面
- 工业和扩展温度范围:-40C至+85C和-40C至+125C
- I/O和封装:32针QFN封装，5 x 5 x 0.9mm3
- 符合EN 300 328/440、FCC-CFR-47第15部分、ARIB STD-66、RSS-210标准
- 符合IEEE 802.15.4 2003/2006/2011标准
Parametrics 参数化
| Protocol | 802.15.4 |
| Package | 32QFN |
| GPIO | 0 |
| ADC Channels | 0 |
| ADC Resolution | 0 |
| Concurrent Mode (STA and AP) | No |
| Operating Temp (°C) | -40 to +125 -40 to +125 |
| Operating Voltage (V) | 1.8 to 3.6 |
| Power Down Mode Current Consumption (uA) | 0 |
| RAM (KB) | 0 |
| RX Sensitivity (dBm) | 0 |
| SoftAP Client Count | 0 |
| Trust&Go | No |
| TX Output Power (dBm) | 0 |
| 草案 | 802.15.4 |
| 包裹 | 32QFN |
| GPIO | 0 |
| ADC通道 | 0 |
| ADC分辨率 | 0 |
| 并发模式(STA和AP) | 不 |
| 工作温度(℃) | -40至+125 -40至+125 |
| 工作电压(V) | 1.8到3.6 |
| 省电模式下的功耗(uA) | 0 |
| 内存(KB) | 0 |
| 接收灵敏度(dBm) | 0 |
| SoftAP客户端计数 | 0 |
| 信任和行动 | 不 |
| TX输出功率(dBm) | 0 |
AT86RF233-ZUR
Feature rich, low-power 2.4GHz transceiver designed for industrial and consumer IEEE 802.15.4-2006/2011, zigbee, SP100, WirelessHART, ISM, and high data rate applications. It is a true SPI-to-antenna solution providing a complete radio transceiver interface between the antenna and the microcontroller.
It comprises the analog radio transceiver and the digital demodulation including time and frequency synchronization, and data buffering. All RF-critical components are integrated on a single chip minimizing the number of required external components to the antenna, crystal and decoupling capacitors. The bidirectional differential antenna pins, used for transmission and reception, eliminate the need for an external antenna switch.
An internal 128 byte RAM buffers transmit and receive data. Two on-chip low dropout (LDO) voltage regulators provide the internal analog and digital 1.8V supply.
功能丰富的低功耗2.4GHz收发器，设计用于工业和消费类IEEE 802.15.4-2006/2011、zigbee、SP100、WirelessHART、ISM和高数据速率应用。这是一款真正的SPI至天线解决方案，在天线和微控制器之间提供完整的无线电收发器接口。
它包括模拟无线电收发器和数字解调，包括时间和频率同步以及数据缓冲。所有RF关键元件都集成在一个芯片上，从而最大限度地减少了天线、晶体和去耦电容所需的外部元件数量。双向差分天线引脚用于发射和接收，无需外部天线开关。
内部128字节RAM缓冲器用于发送和接收数据。两个片内低压差(LDO)稳压器提供内部模拟和数字1.8V电源。
Product Features 产品特性
- High Performance RF-CMOS 2.4GHz radio transceiver targeted for IEEE® 802.15.4, zigbee®, RF4CE, 6LoWPAN, and ISM applications
- Receiver sensitivity -101dBm
- Programmable TX output power from -17dBm up to +4dBm
- Ultra-low current consumption: 0.02µA in deep sleep mode
- Ultra-low supply voltage (1.8V to 3.6V) with internal regulator
- Support for coin cell operation
- Optimized for low BoM Cost and ease of production: few external components necessary
- Easy to use interface
- Industrial and extended temperature range: -40C to +85C and -40C to +125C
- I/O and packages: 32-pin QFN package, 5 x 5 x 0.9mm3
- Compliant to EN 300 328/440, FCC-CFR-47 Part 15, ARIB STD-66, RSS-210
- Compliant to IEEE 802.15.4 2003/2006/2011
- 高性能RF-CMOS 2.4GHz无线电收发器，针对IEEE 802.15.4、zigbee、RF4CE、6LoWPAN和ISM应用而设计
- 接收器灵敏度-101dBm
- 可编程TX输出功率范围为-17dBm至+4dBm
- 超低功耗:深度睡眠模式下为0.02 A
- 内置调节器的超低电源电压(1.8V至3.6V)
- 支持硬币电池操作
- 针对低BoM成本和易于生产进行了优化:几乎不需要外部组件
- 易于使用的界面
- 工业和扩展温度范围:-40C至+85C和-40C至+125C
- I/O和封装:32针QFN封装，5 x 5 x 0.9mm3
- 符合EN 300 328/440、FCC-CFR-47第15部分、ARIB STD-66、RSS-210标准
- 符合IEEE 802.15.4 2003/2006/2011标准
Parametrics 参数化
| Protocol | 802.15.4 |
| Package | 32QFN |
| GPIO | 0 |
| ADC Channels | 0 |
| ADC Resolution | 0 |
| Concurrent Mode (STA and AP) | No |
| Operating Temp (°C) | -40 to +125 -40 to +125 |
| Operating Voltage (V) | 1.8 to 3.6 |
| Power Down Mode Current Consumption (uA) | 0 |
| RAM (KB) | 0 |
| RX Sensitivity (dBm) | 0 |
| SoftAP Client Count | 0 |
| Trust&Go | No |
| TX Output Power (dBm) | 0 |
| 草案 | 802.15.4 |
| 包裹 | 32QFN |
| GPIO | 0 |
| ADC通道 | 0 |
| ADC分辨率 | 0 |
| 并发模式(STA和AP) | 不 |
| 工作温度(℃) | -40至+125 -40至+125 |
| 工作电压(V) | 1.8到3.6 |
| 省电模式下的功耗(uA) | 0 |
| 内存(KB) | 0 |
| 接收灵敏度(dBm) | 0 |
| SoftAP客户端计数 | 0 |
| 信任和行动 | 不 |
| TX输出功率(dBm) | 0 |
