ATA6561-GAQW-N
The Microchip ATATA6561 is a high-speed CAN FD ready CAN transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance, as well as features such as:
- Ideal passive behavior to the CAN bus when the supply voltage is off
- Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Two operating modes (Standby and Normal Mode) together with the dedicated fail-safe features make the Atmel. ATA6561 an excellent choice for all types of high- speed CAN networks, especially in nodes requiring low-power mode with wake-up capability via the CAN bus.
Microchip ATATA6561是一款高速CAN FD ready CAN收发器，提供控制器局域网(CAN)协议控制器与物理双线CAN总线之间的接口。该收发器设计用于汽车行业的高速(最高5Mbit/s) CAN应用，为CAN协议控制器(微控制器)提供差分发送和接收能力。它提供改进的电磁兼容性(EMC)和静电放电(ESD)性能，以及以下特性:
- 当电源电压关闭时，CAN总线的理想被动行为
- 与微控制器直接接口，电源电压范围为3V至5V
两种操作模式(待机和正常模式)以及专用的故障安全功能使Atmel。ATA6561是所有类型的高速CAN网络的绝佳选择，特别是在需要低功耗模式和通过CAN总线唤醒功能的节点中。
Product Features 产品特性
- Fully ISO 11898-2,-5, SAE J2284 compliant
- CAN FD ready
- Communication speed up to 5Mbit/s
- Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
- Differential receiver with wide common mode range
- Direct interfacing to microcontrollers with supply voltages from 3V to 5V
- Remote wake-up capability via CAN bus
- Functional behavior predictable under all supply conditions
- Transceiver disengages from the bus when not powered up
- RXD recessive clamping detection
- High electrostatic discharge (ESD) handling capability on the bus pins
- Bus pins protected against transients in automotive environments
- Transmit data (TXD) dominant time-out function
- Undervoltage detection on VCC
- CANH/CANL short-circuit and overtemperature protected
- AEC-Q100 and AEC-Q006
- Packages: SOIC8, VDFN8 with wettable flanks (Moisture Sensitivity Level 1)
- 完全符合ISO 11898-2，-5，SAE J2284标准
- FD准备好了吗
- 通信速度高达5兆位/秒
- 低电磁辐射(EME)和高电磁抗扰度(EMI)
- 宽共模范围差分接收器
- 与微控制器直接接口，电源电压范围为3V至5V
- 通过CAN总线实现远程唤醒功能
- 所有电源条件下的功能行为均可预测
- 未通电时，收发器脱离总线
- RXD隐性箝位检测
- 总线引脚上的高静电放电(ESD)处理能力
- 汽车环境中针对瞬变的总线引脚保护
- 传输数据(TXD)主导超时功能
- VCC欠压检测
- CANH/CANL短路和过热保护
- AEC-Q100和AEC-Q006
- 封装:SOIC8、VDFN8，带可湿性侧面(湿度敏感度等级1)
ATA6561-GAQW-N
The Microchip ATATA6561 is a high-speed CAN FD ready CAN transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance, as well as features such as:
- Ideal passive behavior to the CAN bus when the supply voltage is off
- Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Two operating modes (Standby and Normal Mode) together with the dedicated fail-safe features make the Atmel. ATA6561 an excellent choice for all types of high- speed CAN networks, especially in nodes requiring low-power mode with wake-up capability via the CAN bus.
Microchip ATATA6561是一款高速CAN FD ready CAN收发器，提供控制器局域网(CAN)协议控制器与物理双线CAN总线之间的接口。该收发器设计用于汽车行业的高速(最高5Mbit/s) CAN应用，为CAN协议控制器(微控制器)提供差分发送和接收能力。它提供改进的电磁兼容性(EMC)和静电放电(ESD)性能，以及以下特性:
- 当电源电压关闭时，CAN总线的理想被动行为
- 与微控制器直接接口，电源电压范围为3V至5V
两种操作模式(待机和正常模式)以及专用的故障安全功能使Atmel。ATA6561是所有类型的高速CAN网络的绝佳选择，特别是在需要低功耗模式和通过CAN总线唤醒功能的节点中。
Product Features 产品特性
- Fully ISO 11898-2,-5, SAE J2284 compliant
- CAN FD ready
- Communication speed up to 5Mbit/s
- Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
- Differential receiver with wide common mode range
- Direct interfacing to microcontrollers with supply voltages from 3V to 5V
- Remote wake-up capability via CAN bus
- Functional behavior predictable under all supply conditions
- Transceiver disengages from the bus when not powered up
- RXD recessive clamping detection
- High electrostatic discharge (ESD) handling capability on the bus pins
- Bus pins protected against transients in automotive environments
- Transmit data (TXD) dominant time-out function
- Undervoltage detection on VCC
- CANH/CANL short-circuit and overtemperature protected
- AEC-Q100 and AEC-Q006
- Packages: SOIC8, VDFN8 with wettable flanks (Moisture Sensitivity Level 1)
- 完全符合ISO 11898-2，-5，SAE J2284标准
- FD准备好了吗
- 通信速度高达5兆位/秒
- 低电磁辐射(EME)和高电磁抗扰度(EMI)
- 宽共模范围差分接收器
- 与微控制器直接接口，电源电压范围为3V至5V
- 通过CAN总线实现远程唤醒功能
- 所有电源条件下的功能行为均可预测
- 未通电时，收发器脱离总线
- RXD隐性箝位检测
- 总线引脚上的高静电放电(ESD)处理能力
- 汽车环境中针对瞬变的总线引脚保护
- 传输数据(TXD)主导超时功能
- VCC欠压检测
- CANH/CANL短路和过热保护
- AEC-Q100和AEC-Q006
- 封装:SOIC8、VDFN8，带可湿性侧面(湿度敏感度等级1)
