ATA6564-GAQW1

Inventory search

Technical information

ATA6564-GAQW1Your current position：Home > ATA6564-GAQW1

View large image

ATA6564-GAQW1
BaoxingWei inventory：2000 PCS
Mfg： MICROCHIP
Package： SOP8
D/C： 22+
Note： Supply only imported original genuine Shenzhen and Hongkong in stock
PDF：

ATA6564-GAQW1

The Microchip ATA6564 is a high-speed CAN FD transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance, as well as features such as:

Ideal passive behavior to the CAN bus when the supply voltage is off
Direct interfacing to microcontrollers with supply voltages from 3V to 5V

Two operating modes (Silent and Normal Mode) together with the dedicated fail-safe features make the Atmel. ATA6564 an excellent choice for all types of high- speed CAN networks, especially in nodes requiring low-power mode with wake-up capability via the CAN bus.

The ATA6564 is automotive Grade 0 qualified for an ambient temperature range from -40° to 150°C.

微芯片ATA6564是一款高速CAN FD收发器，提供控制器局域网(CAN)协议控制器与物理双线CAN总线之间的接口。该收发器设计用于汽车行业的高速(最高5Mbit/s) CAN应用，为CAN协议控制器(微控制器)提供差分发送和接收能力。它提供改进的电磁兼容性(EMC)和静电放电(ESD)性能，以及以下特性:

当电源电压关闭时，CAN总线的理想被动行为
与微控制器直接接口，电源电压范围为3V至5V

两种操作模式(静音和正常模式)以及专用的故障安全功能使Atmel。ATA6564是所有类型的高速CAN网络的绝佳选择，特别是在需要低功耗模式和通过CAN总线唤醒功能的节点中。

ATA6564通过汽车0级认证，环境温度范围为-40至150°c。

Product Features 产品特性

Fully ISO 11898-2, ISO 11898-2: 2016 and SAE J2962-2 compliant
ISO 26262 FuSa Ready
CAN FD - communication speed up to 5Mbit/s
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Differential receiver with wide common mode range
Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Functional behavior predictable under all supply conditions
Transceiver disengages from the bus when not powered up
RXD recessive clamping detection
High electrostatic discharge (ESD) handling capability on the bus pins
Bus pins protected against transients in automotive environments
Transmit data (TXD) dominant time-out function
Undervoltage detection on VCC
CANH/CANL short-circuit and overtemperature protected
AEC-Q100 and AEC-Q006
Packages: SOIC8, VDFN8 with wettable flanks (Moisture Sensitivity Level 1)

Built-in Safety Features

Power-on Reset
Voltage Monitoring (VIO, VCC)
TXD Dominant Timeout
RXD Recessive clamp detection
Overtemperature Detection
完全符合ISO 11898-2、ISO 11898-2: 2016和SAE J2962-2标准
ISO 26262萨福就绪
FD -通信速度能否达到5兆位/秒
低电磁辐射(EME)和高电磁抗扰度(EMI)
宽共模范围差分接收器
与微控制器直接接口，电源电压范围为3V至5V
所有电源条件下的功能行为均可预测
未通电时，收发器脱离总线
RXD隐性箝位检测
总线引脚上的高静电放电(ESD)处理能力
汽车环境中针对瞬变的总线引脚保护
传输数据(TXD)主导超时功能
VCC欠压检测
CANH/CANL短路和过热保护
AEC-Q100和AEC-Q006
封装:SOIC8、VDFN8，带可湿性侧面(湿度敏感度等级1)

内置安全功能

上电复位
电压监控(VCC VIO)
TXD主导超时
RXD隐性箝位检测
过温检测

Home

Products

Stock

Service

About Us

Contact Us

View large image

Product Features 产品特性

Product Features 产品特性

Skype

whatapp

Hotline

E-mail