KSZ8091RNBIA-TRYour current position:Home > KSZ8091RNBIA-TR
KSZ8091RNBIA-TR
Product Features 产品特性
Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet transceiver Wake-on-LAN (WOL) support with either magic packet, link status change, or robust custom-packet detection Power-down and power-saving modes MII interface support (KSZ8091MNX, KSZ8091MLX) RMII v1.2 interface support with a 50MHz reference clock output to MAC and an option to input a 50MHz reference clock (KSZ8091RNB) Back-to-back mode support for a 100Mbps copper repeater MDC/MDIO management interface for PHY register configuration Programmable interrupt output LED outputs for link and activity status indication, plus speed indication for KSZ8091RNB On-chip termination resistors for the differential pairs Baseline wander correction HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option Auto-negotiation to automatically select the highest link-up speed (10/100Mbps) and duplex (half/full) LinkMD® TDR-based cable diagnostics to identify faulty copper cabling Parametric NAND Tree support for fault detection between chip I/Os and the board Loopback modes for diagnostics Single 3.3V power supply with VDD I/O options for 1.8V, 2.5V, or 3.3V Built-in 1.2V regulator for core Available in 24-pin (4mm x 4mm) QFN, 32-pin (5mm x 5mm) QFN and 48-pin (7mm x 7mm) LQFP packages 符合IEEE 802.3标准的单芯片10Base-T/100Base-TX以太网收发器 LAN唤醒(WOL)支持魔术数据包、链路状态更改或强大的自定义数据包检测 掉电和省电模式 MII接口支持(KSZ8091MNX、KSZ8091MLX) RMII v1.2接口支持50MHz参考时钟输出到MAC,并可选择输入50MHz参考时钟(KSZ8091RNB) 100Mbps铜缆中继器的背靠背模式支持 PHY寄存器配置的MDC/MDIO管理接口 可编程中断输出 链接和活动状态指示的LED输出,以及KSZ8091RNB的速度指示 差分对的片内端接电阻 基线漂移校正 HP Auto MDI/MDI-X通过禁用和启用选项可靠地检测和纠正直通和交叉电缆连接 自动协商,自动选择最高链接速度(10/100Mbps)和双工(半双工/全双工) 基于LinkMD TDR的电缆诊断,用于识别故障铜缆 参数NAND树支持芯片I/o和电路板之间的故障检测 诊断的回送模式 3.3V单电源,带1.8V、2.5V或3.3V VDD I/O选项 内核内置1.2V稳压器 提供24引脚(4毫米x 4毫米)QFN、32引脚(5毫米x 5毫米)QFN和48引脚(7毫米x 7毫米)LQFP封装