MCP130T-300I/TT
The MCP130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. MCP130 features an open drain output with internal 5K ohm internal pull-up resistor. MCP130 has active low reset and is available in a choice of seven different trip voltages. It operates over the extended industrial temperature range (-40°C/+85°C). MCP130 is available in a TO-92, SOT23-3, and SN packages.
MCP130是一款电压监控设备,旨在保持微控制器处于复位状态,直到系统电压达到适当水平并稳定下来。当电源电压降至安全工作电平以下时,它还可以防止掉电情况。MCP130具有开漏输出,内置5K欧姆上拉电阻。MCP130具有低电平有效复位功能,有七种不同的跳变电压可供选择。它的工作温度范围为-40°C/+85°C扩展工业温度范围。MCP130提供TO-92、SOT23-3和SN三种封装。
Product Features 产品特性
- Holds microcontroller in reset until supply voltage reaches stable operating level
- Resets microcontroller during power loss
- Precision monitoring of 3V, 3.3V and 5V systems
- 7 voltage trip points available
- Active low RESET pin
- Open drain output
- Internal pull-up resistor (5kΩ) for MCP130
- Holds RESET for 350ms (typical)
- RESET to VCC = 1.0V
- Accuracy of +(-)125mV for 5V systems and +(-)75mV for 3V systems over temp
- 45uA typical operating current
- Industrial (I): -40C to +85C
- 保持微控制器复位,直到电源电压达到稳定的工作水平
- 掉电时复位微控制器
- 3V、3.3V和5V系统的精密监控
- 7个电压跳变点可用
- 低电平有效复位引脚
- 开漏输出
- MCP130的内部上拉电阻(5kω)
- 保持复位350毫秒(典型值)
- 重置为VCC = 1.0V
- 5V系统的精度为+(-)125mV,3V系统的精度为+(-)75mV(过温)
- 45uA典型工作电流
- 工业(I): -40C至+85C
Parametrics 参数化
Product Type | Supervisor |
Nominal Reset Voltage Min | 2.625 |
Watchdog Timer | No |
Manual Reset | No |
Nominal Reset Voltage Max | 4.725 |
Power Fail | No |
Min Operating Voltage (V) | 1 |
Max Operating Voltage (V) | 5.5 |
Min Operating Ambient Temperature (°C) | -40 |
Max Operating Ambient Temperature (°C) | 85 |
产品类型 | 监督者 |
最小标称复位电压 | 2.625 |
看门狗定时器 | 不 |
手控复位 | 不 |
最大标称复位电压 | 4.725 |
电力故障 | 不 |
最小工作电压(V) | 1 |
最大工作电压(V) | 5.5 |
最低工作环境温度(℃) | -40 |
最高工作环境温度(°C) | 85 |
MCP130T-300I/TT
The MCP130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. MCP130 features an open drain output with internal 5K ohm internal pull-up resistor. MCP130 has active low reset and is available in a choice of seven different trip voltages. It operates over the extended industrial temperature range (-40°C/+85°C). MCP130 is available in a TO-92, SOT23-3, and SN packages.
MCP130是一款电压监控设备,旨在保持微控制器处于复位状态,直到系统电压达到适当水平并稳定下来。当电源电压降至安全工作电平以下时,它还可以防止掉电情况。MCP130具有开漏输出,内置5K欧姆上拉电阻。MCP130具有低电平有效复位功能,有七种不同的跳变电压可供选择。它的工作温度范围为-40°C/+85°C扩展工业温度范围。MCP130提供TO-92、SOT23-3和SN三种封装。
Product Features 产品特性
- Holds microcontroller in reset until supply voltage reaches stable operating level
- Resets microcontroller during power loss
- Precision monitoring of 3V, 3.3V and 5V systems
- 7 voltage trip points available
- Active low RESET pin
- Open drain output
- Internal pull-up resistor (5kΩ) for MCP130
- Holds RESET for 350ms (typical)
- RESET to VCC = 1.0V
- Accuracy of +(-)125mV for 5V systems and +(-)75mV for 3V systems over temp
- 45uA typical operating current
- Industrial (I): -40C to +85C
- 保持微控制器复位,直到电源电压达到稳定的工作水平
- 掉电时复位微控制器
- 3V、3.3V和5V系统的精密监控
- 7个电压跳变点可用
- 低电平有效复位引脚
- 开漏输出
- MCP130的内部上拉电阻(5kω)
- 保持复位350毫秒(典型值)
- 重置为VCC = 1.0V
- 5V系统的精度为+(-)125mV,3V系统的精度为+(-)75mV(过温)
- 45uA典型工作电流
- 工业(I): -40C至+85C
Parametrics 参数化
Product Type | Supervisor |
Nominal Reset Voltage Min | 2.625 |
Watchdog Timer | No |
Manual Reset | No |
Nominal Reset Voltage Max | 4.725 |
Power Fail | No |
Min Operating Voltage (V) | 1 |
Max Operating Voltage (V) | 5.5 |
Min Operating Ambient Temperature (°C) | -40 |
Max Operating Ambient Temperature (°C) | 85 |
产品类型 | 监督者 |
最小标称复位电压 | 2.625 |
看门狗定时器 | 不 |
手控复位 | 不 |
最大标称复位电压 | 4.725 |
电力故障 | 不 |
最小工作电压(V) | 1 |
最大工作电压(V) | 5.5 |
最低工作环境温度(℃) | -40 |
最高工作环境温度(°C) | 85 |