MCP14E5-E/SNYour current position:Home > MCP14E5-E/SN
MCP14E5-E/SN
The MCP14E3/E4/E5 devices are a family of 4 A, dual output MOSFET gate drivers with separate enable functions for each output. These MOSFET gate drivers, the MCP14E3/E4/E5 can charge 2200 pF gate capacitance in under 15 ns (typical). The inputs are TTL/CMOS compatible, with 300 mV of hysteresis between the high and low input levels, providing noise immunity while allowing the device to be driven from slow rising and falling signals. The MCP14E3 offers dual inverting outputs, the MCP14E4 offers dual non-inverting outputs, and the MCP14E5 offers complimentary outputs.
MCP14E3/E4/E5器件是4 A双通道输出MOSFET栅极驱动器系列,每个输出具有独立的使能功能。这些MOSFET栅极驱动器MCP14E3/E4/E5可在15 ns(典型值)内为2200 pF栅极电容充电。输入为TTL/CMOS兼容型,高、低输入电平之间存在300 mV迟滞,提供抗扰度,同时允许器件由缓慢上升和下降信号驱动。MCP14E3提供双路反相输出,MCP14E4提供双路同相输出,MCP14E5提供互补输出。
Product Features 产品特性
High peak output current: 4 A (typical) Dual output drivers, with independent enable function for each driver Low shoot-through/cross-conduction current in output stage Wide input supply operating range: 4.5 V to 18 V 2200 pF in 15 ns (typical) 5600 pF in 26 ns (typical) Short delay times: 50 ns (typical) Low output impedance: 3.0 Ω (typical) Latch-up protected: will withstand 1.5 A reverse current Input are TTL/CMOS compatible and will withstand negative swings up to 5 V ESD protected: 4 kV
高峰值输出电流:4 A(典型值) 双输出驱动器,每个驱动器具有独立的使能功能 输出级中的低击穿/交叉传导电流 宽输入电源工作范围:4.5 V至18 V 15 ns内2200 pF(典型值) 5600 pF,26 ns(典型值) 短延迟时间:50 ns(典型值) 低输出阻抗:3.0ω(典型值) 闩锁保护:将承受1.5 A的反向电流 输入为TTL/CMOS兼容型,可承受最高5 V的负摆幅 ESD保护:4 kV