MCP1700-3302E/TT

General Description 

The MCP1700 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 1.6 µA of quiescent current (typical). The input operating range is specified from 2.3V to 6.0V, making it an ideal choice for two and three primary cell battery-powered applications, as well as single cell Li-Ion-powered applications. 

The MCP1700 is capable of delivering 250 mA with only 178 mV of input to output voltage differential (VOUT = 2.8V). The output voltage tolerance of the MCP1700 is typically ±0.4% at +25°C and ±3% maximum over the operating junction temperature range of -40°C to +125°C. Output voltages available for the MCP1700 range from 1.2V to 5.0V. 

The LDO output is stable when using only 1 µF output capacitance. Ceramic, tantalum or aluminum electrolytic capacitors can all be used for input and output. Overcurrent limit and overtemperature shutdown provide a robust solution for any application. Package options include SOT-23, SOT-89, TO-92 and 2x2 DFN-6.

Package Types

Applications 

• Battery-Powered Devices • Battery-Powered Alarm Circuits • Smoke Detectors • CO2 Detectors • Pagers and Cellular Phones • Smart Battery Packs • Low Quiescent Current Voltage Reference • PDAs • Digital Cameras • Microcontroller Power

Features

• AEC-Q100 Qualified and PPAP Capable • 1.6 µA Typical Quiescent Current • Input Operating Voltage Range: 2.3V to 6.0V • Output Voltage Range: 1.2V to 5.0V • 250 mA Output Current for Output Voltages  2.5V • 200 mA Output Current for Output Voltages < 2.5V • Low Dropout (LDO) Voltage - 178 mV Typical @ 250 mA for VOUT = 2.8V • 0.4% Typical Output Voltage Tolerance • Standard Output Voltage Options: - 1.2V, 1.8V, 2.5V, 2.8V, 2.9V, 3.0V, 3.3V, 5.0V • Stable with 1.0 µF Ceramic Output Capacitor • Short Circuit Protection • Overtemperature Protection

Production identification system 

MCP1700-3302E/TT

简述

MCP1700是CMOS低降差(LDO)稳压器系列，可提供高达250 mA的电流，同时仅消耗1.6 μ a的静态电流(典型)。输入工作范围指定为2.3V至6.0V，使其成为双电池和三电池供电应用以及单电池锂离子供电应用的理想选择。MCP1700能够提供250 mA，输入输出电压差仅为178 mV (VOUT = 2.8V)。MCP1700的输出电压公差在+25°C时通常为±0.4%，在-40°C至+125°C的工作结温范围内最大±3%。MCP1700的输出电压范围为1.2V ~ 5.0V。当只使用1 μ F输出电容时，LDO输出是稳定的。陶瓷、钽或铝电解电容器都可用于输入和输出。过流限制和过温关闭为任何应用提供了可靠的解决方案。封装选项包括SOT-23, SOT-89, TO-92和2x2 DFN-6。

应用

•电池供电设备

•电池供电报警电路

•烟雾探测器

•二氧化碳探测器

•寻呼机和手机

•智能电池组

•低静态电流电压参考

•pda

•数码相机

•微控制器电源

特性

•AEC-Q100合格和PPAP能力

•1.6 μ A典型静态电流

•输入工作电压范围:2.3V至6.0V

•输出电压范围:1.2V至5.0V

•输出电压250 mA输出电流2.5V

•输出电压200 mA输出电流&lt;

•标准输出电压选项:- 1.2V, 1.8V, 2.5V, 2.8V, 2.9V, 3.0V, 3.3V, 5.0V

•稳定的1.0 μ F陶瓷输出电容

•短路保护

•过温保护