MCP1702T-3302E/MB
The MCP1702 is a CMOS low dropout positive voltage regulator with 250 mA maximum output current. MCP1702 works with input voltage of up to 13.2V and in combination with its low current consumption of 2 µA is an ideal solution for applications using multi-cell, 9V alkaline or one- or two cell lithium-ion batteries.
MCP1702是一款CMOS低压差正电压调节器,最大输出电流为250 mA。MCP1702可在高达13.2V的输入电压下工作,结合其2 A的低功耗,是使用多节9V碱性或单节或两节锂离子电池应用的理想解决方案。
Product Features 产品特性
2.0 µA quiescent current (typical)
Wide input operating voltage range: 2.7V to 13.2V
250 mA Output Current for Output Voltages = 2.5V
200 mA Output Current for Output Voltages < 2.5V
Output voltage range 1.2V to 5.5V in 0.1V increments (50 mV increments available upon request)
Stable with 1.0 µF to 22 µF ceramic, aluminum, or tantalum output capacitors
Short-circuit protection
Overtemperature protection
Package options: 3-Pin SOT-23A, 3-Pin SOT-89,TO-92-3
- 2.0安静态电流(典型值)
- 宽输入工作电压范围:2.7V至13.2V
- 输出电压= 2.5V时,输出电流为250 mA
- 输出电压< 2.5V时,输出电流为200 mA
- 输出电压范围为1.2V至5.5V,增量为0.1V(可根据要求提供50 mV增量)
- 在1.0 F至22 F陶瓷、铝或钽输出电容下保持稳定
- 短路保护
- 过热保护
- 封装选项:3引脚SOT-23A、3引脚SOT-89、TO-92-3
Parametrics 参数化
Product Type | Single LDOs |
# of Out | 1 |
IOUT #1 | 250 |
Rated IOUT | 250 |
VIN Min (V) | 2.7 |
VIN Max (V) | 13.2 |
VOUT (V) | 1.2 1.5 1.8 2.5 2.8 3.0 3.3 4.0 5.0 |
Voltage Drop Typ (mV) | 625 |
IGND Typ (µA) | 2 |
Tol Typ % | ±0.4 |
PSRR 1 kHz (dB) | 44 |
产品类型 | 单通道LDO |
出去的次数 | 1 |
IOUT #1 | 250 |
额定IOUT | 250 |
VIN最小值(V) | 2.7 |
VIN最大值(V) | 13.2 |
VOUT(伏) | 1.2 1.5 1.8 2.5 2.8 3.0 3.3 4.0 5.0 |
电压降典型值(mV) | 625 |
IGND典型值(A) | 2 |
公差类型% | 0.4 |
PSRR 1千赫(分贝) | 44 |
MCP1702T-3302E/MB
The MCP1702 is a CMOS low dropout positive voltage regulator with 250 mA maximum output current. MCP1702 works with input voltage of up to 13.2V and in combination with its low current consumption of 2 µA is an ideal solution for applications using multi-cell, 9V alkaline or one- or two cell lithium-ion batteries.
MCP1702是一款CMOS低压差正电压调节器,最大输出电流为250 mA。MCP1702可在高达13.2V的输入电压下工作,结合其2 A的低功耗,是使用多节9V碱性或单节或两节锂离子电池应用的理想解决方案。
Product Features 产品特性
2.0 µA quiescent current (typical)
Wide input operating voltage range: 2.7V to 13.2V
250 mA Output Current for Output Voltages = 2.5V
200 mA Output Current for Output Voltages < 2.5V
Output voltage range 1.2V to 5.5V in 0.1V increments (50 mV increments available upon request)
Stable with 1.0 µF to 22 µF ceramic, aluminum, or tantalum output capacitors
Short-circuit protection
Overtemperature protection
Package options: 3-Pin SOT-23A, 3-Pin SOT-89,TO-92-3
- 2.0安静态电流(典型值)
- 宽输入工作电压范围:2.7V至13.2V
- 输出电压= 2.5V时,输出电流为250 mA
- 输出电压< 2.5V时,输出电流为200 mA
- 输出电压范围为1.2V至5.5V,增量为0.1V(可根据要求提供50 mV增量)
- 在1.0 F至22 F陶瓷、铝或钽输出电容下保持稳定
- 短路保护
- 过热保护
- 封装选项:3引脚SOT-23A、3引脚SOT-89、TO-92-3
Parametrics 参数化
Product Type | Single LDOs |
# of Out | 1 |
IOUT #1 | 250 |
Rated IOUT | 250 |
VIN Min (V) | 2.7 |
VIN Max (V) | 13.2 |
VOUT (V) | 1.2 1.5 1.8 2.5 2.8 3.0 3.3 4.0 5.0 |
Voltage Drop Typ (mV) | 625 |
IGND Typ (µA) | 2 |
Tol Typ % | ±0.4 |
PSRR 1 kHz (dB) | 44 |
产品类型 | 单通道LDO |
出去的次数 | 1 |
IOUT #1 | 250 |
额定IOUT | 250 |
VIN最小值(V) | 2.7 |
VIN最大值(V) | 13.2 |
VOUT(伏) | 1.2 1.5 1.8 2.5 2.8 3.0 3.3 4.0 5.0 |
电压降典型值(mV) | 625 |
IGND典型值(A) | 2 |
公差类型% | 0.4 |
PSRR 1千赫(分贝) | 44 |