MCP3021A5T-E/OT
The MCP3021 is a successive approximation A/D converter with 10-bit resolution. Available in the SOT-23 package, this device provides one, single-ended input with very low power consumption. The MCP3021 provides a low maximum conversion current and standby current of 250 µA and 1 µA respectively. Low current consumption combined with the small SOT-23 package make this device ideal for battery powered and remote data acquisition applications. Communication to the MCP3021 is performed using a 2-wire I2C™Compatible compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C™Compatible modes are available with the device. An on-chip conversion clock enables independent timing for the I2C™Compatible clock and the conversion clock. The device is also addressable allowing up to eight devices on a single 2-wire bus. The MCP3021 runs on a single supply voltage that operates over a broad range of 2.7 V to 5.5 V. This device also provides excellent linearity of ±1 LSB differential non-linearity and ±1 LSB integral non-linearity. Operating temperature range for this device is -40°C to +125°C.
MCP3021是一款10位分辨率的逐次逼近型模数转换器。该器件采用SOT-23封装,提供一路单端输入,功耗极低。MCP3021提供较低的最大转换电流和待机电流,分别为250 A和1 A。低功耗加上小型SOT-23封装,使该器件成为电池供电和远程数据采集应用的理想选择。与MCP3021的通信使用双线I2c兼容的兼容接口。标准(100 kHz)和快速(400 kHz) I2该器件提供c兼容模式。片内转换时钟支持I的独立时序2c兼容时钟和转换时钟。该器件也是可寻址的,允许在单条双线总线上最多连接8个器件。MCP3021采用2.7 V至5.5 V的单电源供电,该器件还提供出色的线性度,差分非线性度为±1 LSB,积分非线性度为±1 LSB。该器件的工作温度范围为-40°C至+125°C
Product Features 产品特性
10-bit resolution
single-ended input
I2C™ Compatible serial interface
Multiple address options
±1 LSB DNL
±1 LSB INL
22.3 ksps sample rate at 5V
-40 to +125°C temperature range
Small SOT-23 packaging
AEC-Q100 Grade 1
- 10位分辨率
- 单端输入
- I2C兼容串行接口
- 多个地址选项
- 1 LSB DNL
- 1 LSB INL
- 5V时采样速率为22.3 ksps
- -40至+125°C温度范围
- 小型SOT-23封装
- AEC-Q100 1级
Parametrics 参数化
Input Channels | 1 |
Resolution | 10 |
MCP3021A5T-E/OT
The MCP3021 is a successive approximation A/D converter with 10-bit resolution. Available in the SOT-23 package, this device provides one, single-ended input with very low power consumption. The MCP3021 provides a low maximum conversion current and standby current of 250 µA and 1 µA respectively. Low current consumption combined with the small SOT-23 package make this device ideal for battery powered and remote data acquisition applications. Communication to the MCP3021 is performed using a 2-wire I2C™Compatible compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C™Compatible modes are available with the device. An on-chip conversion clock enables independent timing for the I2C™Compatible clock and the conversion clock. The device is also addressable allowing up to eight devices on a single 2-wire bus. The MCP3021 runs on a single supply voltage that operates over a broad range of 2.7 V to 5.5 V. This device also provides excellent linearity of ±1 LSB differential non-linearity and ±1 LSB integral non-linearity. Operating temperature range for this device is -40°C to +125°C.
MCP3021是一款10位分辨率的逐次逼近型模数转换器。该器件采用SOT-23封装,提供一路单端输入,功耗极低。MCP3021提供较低的最大转换电流和待机电流,分别为250 A和1 A。低功耗加上小型SOT-23封装,使该器件成为电池供电和远程数据采集应用的理想选择。与MCP3021的通信使用双线I2c兼容的兼容接口。标准(100 kHz)和快速(400 kHz) I2该器件提供c兼容模式。片内转换时钟支持I的独立时序2c兼容时钟和转换时钟。该器件也是可寻址的,允许在单条双线总线上最多连接8个器件。MCP3021采用2.7 V至5.5 V的单电源供电,该器件还提供出色的线性度,差分非线性度为±1 LSB,积分非线性度为±1 LSB。该器件的工作温度范围为-40°C至+125°C
Product Features 产品特性
10-bit resolution
single-ended input
I2C™ Compatible serial interface
Multiple address options
±1 LSB DNL
±1 LSB INL
22.3 ksps sample rate at 5V
-40 to +125°C temperature range
Small SOT-23 packaging
AEC-Q100 Grade 1
- 10位分辨率
- 单端输入
- I2C兼容串行接口
- 多个地址选项
- 1 LSB DNL
- 1 LSB INL
- 5V时采样速率为22.3 ksps
- -40至+125°C温度范围
- 小型SOT-23封装
- AEC-Q100 1级
Parametrics 参数化
Input Channels | 1 |
Resolution | 10 |