MCP6042T-I/SN

Inventory search

Technical information

MCP6042T-I/SNYour current position：Home > MCP6042T-I/SN

View large image

MCP6042T-I/SN
BaoxingWei inventory：2000 PCS
Mfg： MICROCHIP
Package： SOIC8
D/C： 22+
Note： Supply only imported original genuine Shenzhen and Hongkong in stock
PDF：

MCP6042T-I/SN

The MCP6042 dual operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA and an offset voltage that is less than 3 mV. The MCP6042 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP6042 operates with a single supply voltage that can be as low as 1.4V, while drawing less than 1.0 uA of quiescent current per amplifier. The MCP6042 is available in standard 8-lead PDIP, SOIC and MSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment and wearable products.

MCP6042双通道运算放大器的增益带宽积为14 kHz，典型工作电流为600 nA，失调电压小于3 mV。MCP6042采用Microchip先进的CMOS技术，提供低偏置电流、高速操作、高开环增益和轨到轨输出摆幅。MCP6042采用低至1.4V的单电源供电，每个放大器的静态电流小于1.0 uA。MCP6042提供标准8引脚PDIP、SOIC和MSOP封装。该放大器非常适合工业过程控制、低功耗电池供电器件、便携式设备和可穿戴产品。

Product Features 产品特性

Low Quiescent Current: 600 nA/amplifier (typical)
Rail-to-Rail Input/Output
Gain Bandwidth Product: 14 kHz (typical)
Wide Supply Voltage Range: 1.4V to 6.0V
Unity Gain Stable
Available in Single, Dual, and Quad
Chip Select (CS) with MCP6043
Available in SOIC and MSOP packages
低静态电流:600 nA/放大器(典型值)
轨到轨输入/输出
增益带宽积:14 kHz(典型值)
宽电源电压范围:1.4V至6.0V
单位增益稳定
提供单通道、双通道和四通道
采用MCP6043的片选(CS)
提供SOIC和MSOP套餐

Home

Products

Stock

Service

About Us

Contact Us

View large image

Product Features 产品特性

Product Features 产品特性

Skype

whatapp

Hotline

E-mail