MCP607T-I/SN

Inventory search

Technical information

MCP607T-I/SNYour current position：Home > MCP607T-I/SN

View large image

MCP607T-I/SN
BaoxingWei inventory：3000 PCS
Mfg： MICROCHIP
Package： SOIC-8
D/C： 21+
Note： Supply only imported original genuine Shenzhen and Hongkong in stock
PDF：

MCP607T-I/SN

The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 uA and an offset voltage that is less than 250 µV. The MCP607 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP607 operates with a single supply voltage that can be as low as 2.5V, while drawing less than 25 uA of quiescent current per amplifier. The MCP607 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for battery and loop-powered applications as well as industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications. AEC-Q100 Grade 1 qualification is available for this device

MCP607双通道运算放大器(op amp)的增益带宽积为155 kHz，典型工作电流为18.7 uA，失调电压小于250 V，MCP607采用Microchip先进的CMOS技术，可提供低偏置电流、高速工作、高开环增益和轨到轨输出摆幅。MCP607采用低至2.5V的单电源供电，每个放大器的静态电流小于25 uA。MCP607提供标准8引脚PDIP、SOIC和TSSOP封装。该放大器非常适合电池和环路供电应用，以及工业过程控制、低功耗电池供电器件、便携式设备、数据采集设备、测试设备和低端音频应用。该设备可获得AEC-Q100 1级认证

Product Features 产品特性

Low Input Offset Voltage: 250 µV (max.)
Rail-to-Rail Output
Low Input Bias Current: 1 pA (typ.)
Low Quiescent Current: 25 µA (max.)
Power Supply Voltage: 2.5V to 6.0V
Unity-Gain Stable
Industrial Temperature Range: -40°C to +85°C
AEC-Q100 Grade 1

低输入失调电压:250 V(最大值。)
轨到轨输出
低输入偏置电流:1 pA(典型值。)
低静态电流:25安(最大值。)
电源电压:2.5V至6.0V
单位增益稳定
工业温度范围:-40℃至+85℃
AEC-Q100 1级

Home

Products

Stock

Service

About Us

Contact Us

View large image

Product Features 产品特性

Product Features 产品特性

Skype

whatapp

Hotline

E-mail