MIC2026-1YM-TRYour current position:Home > MIC2026-1YM-TR
MIC2026-1YM-TR
The MIC2026 and MIC2076 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The MIC2026/76 are internally current limited and have thermal shutdown that protects the device and load. The MIC2076 offers "smart" thermal shutdown that reduces current consumption in fault modes. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or toggling the enable input will reset the device output. Both devices employ soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed. A fault status output flag is asserted during overcurrent and thermal shutdown conditions. Transient faults are internally filtered. The MIC2026/76 are available in 8-pin DIP or 8-pin SOIC.
MIC2026和MIC2076是高端MOSFET开关,针对需要电路保护的通用配电进行了优化。MIC2026/76内部限流,并具有热关断功能,可保护器件和负载。MIC2076提供“智能”热关断功能,可降低故障模式下的电流消耗。当发生热关断故障时,输出被锁存,直到故障负载被移除。移除负载或切换使能输入将复位器件输出。两款器件均采用软启动电路,可在采用高容性负载的应用中最大限度地降低浪涌电流。过流和热关断条件下会置位故障状态输出标志。瞬时故障在内部被过滤。MIC2026/76提供8引脚DIP或8引脚SOIC。
Product Features 产品特性
140mO maximum on-resistance per channel
2.7V to 5.5V operating range
500mA minimum continuous current per channel
Shortcircuit protection with thermal shutdown
Thermally isolated channels
Fault status flag with 3ms filter eliminates false assertions
Undervoltage lockout
Reverse current flow blocking (no "body diode")
Circuit breaker mode (MIC2076)
Logic-compatible inputs
Soft-start circuit
Low quiescent current
Pin compatible with MIC2526
UL recognized and EN/IEC 60950-1 (CB) Certified
每个通道最大导通电阻为140ω 2.7V至5.5V工作范围 每个通道的最小连续电流为500mA 热关断短路保护 隔热通道 带3毫秒过滤器的故障状态标志消除了错误断言 欠压闭锁 反向电流阻断(无“体二极管”) 断路器模式(MIC2076) 逻辑兼容输入 软启动电路 低静态电流 与MIC2526引脚兼容 UL认证和EN/IEC 60950-1 (CB)认证