MIC39102YM-TR
The MIC39100, MIC39101, and MIC39102 are 1A low-dropout linear voltage regulators that provide low-voltage, high-current output from an extremely small package. Utilizing Micrel's proprietary Super βeta PNP® pass element, the MIC39100/1/2 offers extremely low dropout (typically 410mV at 1A) and low ground current (typically 11mA at 1A).
The MIC39100 is a fixed output regulator offered in the SOT-223 package. The MIC39101 and MIC39102 are fixed and adjustable regulators, respectively, in a thermally enhanced power 8-lead SOIC package.
The MIC39100/1/2 is ideal for PC add-in cards that need to convert from standard 5V to 3.3V, 3.3V to 2.5V or 2.5V to 1.8V. A guaranteed maximum dropout voltage of 630mV over all operating conditions allows the MIC39100/1/2 to provide 2.5V from a supply as low as 3.13V and 1.8V from a supply as low as 2.43V.
The MIC39100/1/2 is fully protected with overcurrent limiting, thermal-shutdown, and reverse-battery protection. Fixed voltages of 5.0V, 3.3V, 2.5V, and 1.8V are available on MIC39100/1 with adjustable output voltages to 1.24V on MIC39102.
MIC39100、MIC39101和MIC39102是1A低压差线性稳压器,采用极小的封装提供低压、大电流输出。利用Micrel专有的Super βeta PNP®通过元件,MIC39100/1/2提供极低的压差(在1A通常为410毫伏)和低接地电流(在1A通常为11毫安)。
MIC39100是一款固定输出调节器,采用SOT-223封装。MIC39101和MIC39102分别是固定和可调稳压器,采用散热增强型8引脚SOIC封装。
MIC39100/1/2非常适合需要从标准5V转换到3.3V、3.3V转换到2.5V或2.5V转换到1.8V的PC插卡。在所有工作条件下,最大保证压差为630mV,因此MIC39100/1/2可以从低至3.13V的电源提供2.5V电压,从低至2.43V的电源提供1.8V电压。
MIC39100/1/2具有过流限制、热关断和反向电池保护功能。MIC39100/1提供5.0V、3.3V、2.5V和1.8V的固定电压,MIC39102的输出电压可调至1.24V。
Product Features 产品特性
Fixed and adjustable output voltages to 1.24V
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V conversion
1A minimum guaranteed output current
1% initial accuracy
Low ground current
Current limiting and thermal shutdown
Reversed-battery protection
Reversed-leakage protection
Fast transient response
Low-profile SOT-223 package
Power SO-8 package
- 1.24伏的固定和可调输出电压
- 非常适合3.0V至2.5V转换
- 非常适合2.5V至1.8V转换
- 1A最小保证输出电流
- 1%初始精度
- 低接地电流
- 限流和热关断
- 反向电池保护
- 反向漏电保护
- 快速瞬态响应
- 薄型SOT-223封装
- 电源SO-8封装
Parametrics 参数化
Product Type | Single LDOs |
Line Regulation (%) | 0 |
Load Regulation(%) | 0 |
# of Out | 1 |
IOUT #1 | 1000 |
Rated IOUT | 1000 |
VIN Min (V) | 2.25 |
VIN Max (V) | 16 |
VOUT (V) | Adj |
Voltage Drop Typ (mV) | 410 |
IGND Typ (µA) | 6 |
Tol Typ % | ±1 |
PSRR 1 kHz (dB) | 55 |
Rev Bat | Yes |
Reverse Current Protect | Yes |
产品类型 | 单通道LDO |
线路调整率(%) | 0 |
负载调整率(%) | 0 |
出去的次数 | 1 |
IOUT #1 | 1000 |
额定IOUT | 1000 |
VIN最小值(V) | 2.25 |
VIN最大值(V) | 16 |
VOUT(伏) | 形容词 |
电压降典型值(mV) | 410 |
IGND典型值(A) | 6 |
公差类型% | 一 |
PSRR 1千赫(分贝) | 55 |
Rev蝙蝠 | 是 |
反向电流保护 | 是 |
MIC39102YM-TR
The MIC39100, MIC39101, and MIC39102 are 1A low-dropout linear voltage regulators that provide low-voltage, high-current output from an extremely small package. Utilizing Micrel's proprietary Super βeta PNP® pass element, the MIC39100/1/2 offers extremely low dropout (typically 410mV at 1A) and low ground current (typically 11mA at 1A).
The MIC39100 is a fixed output regulator offered in the SOT-223 package. The MIC39101 and MIC39102 are fixed and adjustable regulators, respectively, in a thermally enhanced power 8-lead SOIC package.
The MIC39100/1/2 is ideal for PC add-in cards that need to convert from standard 5V to 3.3V, 3.3V to 2.5V or 2.5V to 1.8V. A guaranteed maximum dropout voltage of 630mV over all operating conditions allows the MIC39100/1/2 to provide 2.5V from a supply as low as 3.13V and 1.8V from a supply as low as 2.43V.
The MIC39100/1/2 is fully protected with overcurrent limiting, thermal-shutdown, and reverse-battery protection. Fixed voltages of 5.0V, 3.3V, 2.5V, and 1.8V are available on MIC39100/1 with adjustable output voltages to 1.24V on MIC39102.
MIC39100、MIC39101和MIC39102是1A低压差线性稳压器,采用极小的封装提供低压、大电流输出。利用Micrel专有的Super βeta PNP®通过元件,MIC39100/1/2提供极低的压差(在1A通常为410毫伏)和低接地电流(在1A通常为11毫安)。
MIC39100是一款固定输出调节器,采用SOT-223封装。MIC39101和MIC39102分别是固定和可调稳压器,采用散热增强型8引脚SOIC封装。
MIC39100/1/2非常适合需要从标准5V转换到3.3V、3.3V转换到2.5V或2.5V转换到1.8V的PC插卡。在所有工作条件下,最大保证压差为630mV,因此MIC39100/1/2可以从低至3.13V的电源提供2.5V电压,从低至2.43V的电源提供1.8V电压。
MIC39100/1/2具有过流限制、热关断和反向电池保护功能。MIC39100/1提供5.0V、3.3V、2.5V和1.8V的固定电压,MIC39102的输出电压可调至1.24V。
Product Features 产品特性
Fixed and adjustable output voltages to 1.24V
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V conversion
1A minimum guaranteed output current
1% initial accuracy
Low ground current
Current limiting and thermal shutdown
Reversed-battery protection
Reversed-leakage protection
Fast transient response
Low-profile SOT-223 package
Power SO-8 package
- 1.24伏的固定和可调输出电压
- 非常适合3.0V至2.5V转换
- 非常适合2.5V至1.8V转换
- 1A最小保证输出电流
- 1%初始精度
- 低接地电流
- 限流和热关断
- 反向电池保护
- 反向漏电保护
- 快速瞬态响应
- 薄型SOT-223封装
- 电源SO-8封装
Parametrics 参数化
Product Type | Single LDOs |
Line Regulation (%) | 0 |
Load Regulation(%) | 0 |
# of Out | 1 |
IOUT #1 | 1000 |
Rated IOUT | 1000 |
VIN Min (V) | 2.25 |
VIN Max (V) | 16 |
VOUT (V) | Adj |
Voltage Drop Typ (mV) | 410 |
IGND Typ (µA) | 6 |
Tol Typ % | ±1 |
PSRR 1 kHz (dB) | 55 |
Rev Bat | Yes |
Reverse Current Protect | Yes |
产品类型 | 单通道LDO |
线路调整率(%) | 0 |
负载调整率(%) | 0 |
出去的次数 | 1 |
IOUT #1 | 1000 |
额定IOUT | 1000 |
VIN最小值(V) | 2.25 |
VIN最大值(V) | 16 |
VOUT(伏) | 形容词 |
电压降典型值(mV) | 410 |
IGND典型值(A) | 6 |
公差类型% | 一 |
PSRR 1千赫(分贝) | 55 |
Rev蝙蝠 | 是 |
反向电流保护 | 是 |