PIC12F1822T-E/SN
Debug Support
• Integrated debug support on Device. No debug header is required
• Optional external debug headers, AC244043 (F) / AC244044 (LF), are also available
• Debug and programming support is available via PICkit™ 3, and MPLAB® ICD 3
• For Debug Header information, please refer to DS51292
调试支持
设备上的集成调试支持。不需要调试头
还提供可选的外部调试接头AC244043 (F) / AC244044 (LF)
调试和编程支持可通过pick it 3和MPLAB ICD 3获得
有关调试标题信息,请参考DS51292
Product Features 产品特性
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- Internal 32MHz oscillator
- Integrated Capacitive mTouch Sensing Module
- Data Signal Modulator Module
- MI2C, SPI, EUSART w/auto baud
- ECCP (Enhanced/Capture Compare PWM) Module
- Comparator with selectable Voltage Reference
- 4 Channel 10b ADC with Voltage Reference
- 25mA Source/Sink current I/O
- Two 8-bit Timers (TMR0/TMR2)
- One 16-bit Timer (TMR1)
- Extended Watchdog Timer (EWDT)
- Enhanced Power-On/Off-Reset
- Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
- On Board In-Circuit Debug
- Wide Operating Voltage (1.8V – 5.5V)
- Low Power PIC12LF182x variants (1.8V – 3.6V)
- Standby Current (PIC12LF182X): 20 nA @ 1.8V, typical
- Active Current(PIC12LF1822): 50 uA/MHz @ 1.8V, typical
- 增强型中档内核,49条指令,16个堆栈级别
- 具有自读/写能力的闪存程序存储器
- 内部32MHz振荡器
- 集成电容式mTouch传感模块
- 数据信号调制器模块
- MI2C、SPI、EUSART,带自动波特率
- ECCP(增强型/捕获比较PWM)模块
- 具有可选基准电压的比较器
- 带基准电压源的4通道10b ADC
- 25mA源电流/吸电流I/O
- 两个8位定时器(TMR0/TMR2)
- 一个16位定时器(TMR1)
- 扩展看门狗定时器(EWDT)
- 增强的开机/关机复位
- 掉电复位(BOR)
- 在线串行编程(ICSP)
- 车载在线调试
- 宽工作电压(1.8V–5.5V)
- 低功耗PIC12LF182x变体(1.8V–3.6V)
- 待机电流(pic 12 lf 182 x):1.8V时为20 nA,典型值
- 有功电流(pic 12 lf 1822):1.8V时为50 uA/MHz,典型值
Parametrics 参数化
Program Memory Type | Flash |
Program Memory Size (KB) | 3.5 |
CPU Speed (MIPS/DMIPS) | 8 |
Data EEPROM (bytes) | 256 |
Timers | 2 x 8-bit - 1 x 16-bit |
Stand alone PWM | 0 |
Number of ADCs | 1 |
ADC Channels | 4 |
Max ADC Resolution (bits) | 10 |
Number of Comparators | 1 |
Temp. Range Min. | -40 |
Temp. Range Max. | 125 |
Operation Voltage Max.(V) | 5.5 |
Operation Voltage Min.(V) | 1.8 |
Pin Count | 8 |
Low Power | Yes |
I2C | 1 -I2C |
程序存储器类型 | 闪光 |
程序内存大小(KB) | 3.5 |
CPU速度(MIPS/DMIPS) | 8 |
数据EEPROM(字节) | 256 |
定时器 | 2个8位- 1个16位 |
独立PWM | 0 |
ADC数量 | 1 |
ADC通道 | 4 |
最大ADC分辨率(位) | 10 |
比较器的数量 | 1 |
在…之时最小范围。 | -40 |
在…之时最大范围。 | 125 |
最大工作电压。㈤ | 5.5 |
最小工作电压。㈤ | 1.8 |
引脚数 | 8 |
小功率 | 是 |
I2C | 1 -I2C |
PIC12F1822T-E/SN
Debug Support
• Integrated debug support on Device. No debug header is required
• Optional external debug headers, AC244043 (F) / AC244044 (LF), are also available
• Debug and programming support is available via PICkit™ 3, and MPLAB® ICD 3
• For Debug Header information, please refer to DS51292
调试支持
设备上的集成调试支持。不需要调试头
还提供可选的外部调试接头AC244043 (F) / AC244044 (LF)
调试和编程支持可通过pick it 3和MPLAB ICD 3获得
有关调试标题信息,请参考DS51292
Product Features 产品特性
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- Internal 32MHz oscillator
- Integrated Capacitive mTouch Sensing Module
- Data Signal Modulator Module
- MI2C, SPI, EUSART w/auto baud
- ECCP (Enhanced/Capture Compare PWM) Module
- Comparator with selectable Voltage Reference
- 4 Channel 10b ADC with Voltage Reference
- 25mA Source/Sink current I/O
- Two 8-bit Timers (TMR0/TMR2)
- One 16-bit Timer (TMR1)
- Extended Watchdog Timer (EWDT)
- Enhanced Power-On/Off-Reset
- Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
- On Board In-Circuit Debug
- Wide Operating Voltage (1.8V – 5.5V)
- Low Power PIC12LF182x variants (1.8V – 3.6V)
- Standby Current (PIC12LF182X): 20 nA @ 1.8V, typical
- Active Current(PIC12LF1822): 50 uA/MHz @ 1.8V, typical
- 增强型中档内核,49条指令,16个堆栈级别
- 具有自读/写能力的闪存程序存储器
- 内部32MHz振荡器
- 集成电容式mTouch传感模块
- 数据信号调制器模块
- MI2C、SPI、EUSART,带自动波特率
- ECCP(增强型/捕获比较PWM)模块
- 具有可选基准电压的比较器
- 带基准电压源的4通道10b ADC
- 25mA源电流/吸电流I/O
- 两个8位定时器(TMR0/TMR2)
- 一个16位定时器(TMR1)
- 扩展看门狗定时器(EWDT)
- 增强的开机/关机复位
- 掉电复位(BOR)
- 在线串行编程(ICSP)
- 车载在线调试
- 宽工作电压(1.8V–5.5V)
- 低功耗PIC12LF182x变体(1.8V–3.6V)
- 待机电流(pic 12 lf 182 x):1.8V时为20 nA,典型值
- 有功电流(pic 12 lf 1822):1.8V时为50 uA/MHz,典型值
Parametrics 参数化
Program Memory Type | Flash |
Program Memory Size (KB) | 3.5 |
CPU Speed (MIPS/DMIPS) | 8 |
Data EEPROM (bytes) | 256 |
Timers | 2 x 8-bit - 1 x 16-bit |
Stand alone PWM | 0 |
Number of ADCs | 1 |
ADC Channels | 4 |
Max ADC Resolution (bits) | 10 |
Number of Comparators | 1 |
Temp. Range Min. | -40 |
Temp. Range Max. | 125 |
Operation Voltage Max.(V) | 5.5 |
Operation Voltage Min.(V) | 1.8 |
Pin Count | 8 |
Low Power | Yes |
I2C | 1 -I2C |
程序存储器类型 | 闪光 |
程序内存大小(KB) | 3.5 |
CPU速度(MIPS/DMIPS) | 8 |
数据EEPROM(字节) | 256 |
定时器 | 2个8位- 1个16位 |
独立PWM | 0 |
ADC数量 | 1 |
ADC通道 | 4 |
最大ADC分辨率(位) | 10 |
比较器的数量 | 1 |
在…之时最小范围。 | -40 |
在…之时最大范围。 | 125 |
最大工作电压。㈤ | 5.5 |
最小工作电压。㈤ | 1.8 |
引脚数 | 8 |
小功率 | 是 |
I2C | 1 -I2C |