PIC16F883T-I/SS

This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F883 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

Product Features

• Factory calibrated to ±1%

• Software selectable frequency range of 8 MHz to 32 kHz

• Software tunable

• Two-Speed Start-Up mode

• Fail-safe clock monitoring for critical applications

• Clock mode switching during operation for low-power operation

• Power-Saving Sleep mode

• Power-on Reset (POR)

• Selectable Brown-out Reset (BOR) voltage

• Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

• In-Circuit Serial Programming™ (ICSP™) via two pins

• In-Circuit Debug (ICD) via two pins

• 100,000 erase/write cycle enhanced Flash program memory, typical

• 1,000,000 erase/write cycle data EEPROM memory, typical

• Data EEPROM retention > 40 years

• Self-reprogrammable under software control

• Programmable code protection

• 1 input only pin

• 25 I/O

• High sink/source current 25 mA

• Interrupt-on-pin change option

• TMR0: 8-bit timer/counter with 8-bit prescaler

• TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator

• TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

• Capture/Compare/PWM (CCP) module

• Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering

• Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability

• Supports RS-485, RS-232 and LIN compatibility

• Auto-Baud Detect

• Auto-wake-up on Start bit

• Ultra Low-Power Wake-up (ULPWU)

• 10-bit 11 channel Analog-to-Digital (A/D) Converter

• Programmable on-chip Voltage Reference (CVREF) module (% of VDD)

• Fixed 0.6 Vref

• Comparator inputs and outputs externally accessible

• SR Latch mode

PIC16F883T-I/SS

This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F883 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.