PIC18 Core with 83 Instructions, 31 Stack Levels

Internal 64MHz oscillator

Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)

Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)

32 KB Flash Program Memory with self read/write capability

2048 Bytes Data SRAM Memory

256 Bytes of EEPROM

35 x 10-bit ADC channels

1 x 5-bit DAC

2 x Comparators

Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels

Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders

1 x Zero-Cross Detect

2 x I2C/SPI

2 x EUSART with LIN support

CRC with Memory Scan

Windowed Watchdog Timer (WWDT)

1 x Hardware Limit Timer (HLT)

1 x Complementary Waveform Generator

2 x standalone 10-bit PWM modules

2 x Capture/Compare/PWM modules

Three 8-bit Timers/Counters

Four 16-bit Timers/Counters

1 x Hardware Limit Timer (HLT)

Extended Watchdog Timer (WDT)

eXtreme Low Power (XLP) technology

Doze, Idle, and Sleep Power Saving Operating Modes

Sleep mode: 50nA @ 1.8V, typical

Active mode: 32uA/MHz @ 1.8V, typical

Low Current Power-on Reset (POR)

Brown-out Reset (BOR)

Low-Power BOR (LPBOR)

Peripheral Pin Select

In-Circuit Debug Integrated On-Chip

In-Circuit Serial Programing (ICSP) via Two Pins

PIC18 Core with 83 Instructions, 31 Stack Levels

Internal 64MHz oscillator

Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)

Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)

32 KB Flash Program Memory with self read/write capability

2048 Bytes Data SRAM Memory

256 Bytes of EEPROM

35 x 10-bit ADC channels

1 x 5-bit DAC

2 x Comparators

Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels

Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders

1 x Zero-Cross Detect

2 x I2C/SPI

2 x EUSART with LIN support

CRC with Memory Scan

Windowed Watchdog Timer (WWDT)

1 x Hardware Limit Timer (HLT)

1 x Complementary Waveform Generator

2 x standalone 10-bit PWM modules

2 x Capture/Compare/PWM modules

Three 8-bit Timers/Counters

Four 16-bit Timers/Counters

1 x Hardware Limit Timer (HLT)

Extended Watchdog Timer (WDT)

eXtreme Low Power (XLP) technology

Doze, Idle, and Sleep Power Saving Operating Modes

Sleep mode: 50nA @ 1.8V, typical

Active mode: 32uA/MHz @ 1.8V, typical

Low Current Power-on Reset (POR)

Brown-out Reset (BOR)

Low-Power BOR (LPBOR)

Peripheral Pin Select

In-Circuit Debug Integrated On-Chip

In-Circuit Serial Programing (ICSP) via Two Pins