TC1185-5.0VCT713Your current position:Home > TC1185-5.0VCT713
TC1185-5.0VCT713
150mA CMOS LDO w/ Shutdown and Vref Bypass
The TC1014, TC1015 and TC1185 are high accuracy (typically ±0.5%) CMOS upgrades for older (bipolar) low dropout regulators such as the LP2980. Designed specifically for battery-operated systems, the devices’ CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typically 50 µA at full load (20 to 60 times lower than in bipolar regulators). Key features for the devices include ultra low-noise operation (plus optional Bypass input), fast response to step changes in load, and very low dropout voltage, typically 85 mV (TC1014), 180 mV (TC1015) and 270 mV (TC1185) at full load. Supply current is reduced to 0.5 µA (max) and VOUT falls to zero when the shutdown input is low. The devices also incorporate both over-temperature and over-current protection. The TC1014, TC1015 and TC1185 are stable with an output capacitor of only 1µF and have a maximum output current of 50 mA, 100 mA and 150 mA, respectively. For higher output versions, see the TC1107, TC1108 and TC1173 (IOUT = 300 mA) data sheets.
Product Features
Extremely Low Supply Current (50 µA typical.)
Very Low Dropout Voltage
Minimum 50 mA, 100 mA and 150 mA Output Current (TC1014, TC1015 and TC1185, Respectively)
High Output Voltage Accuracy
Standard or Custom Output Voltages
Power-Saving Shutdown Mode
Reference Bypass Input for Ultra Low-Noise Operation
Over-Current and Over-Temperature Protection
Pin Compatible Upgrades for Bipolar Regulators