特性

• Single Voltage Read and Write Operations– 2.7-3.6V

• Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3

• Up to 50 MHz Clock Frequency

• Superior Reliability– Endurance: 100,000 Cycles (typical)– Greater than 100 years Data Retention

• Low Power Consumption:– Active Read Current: 10 mA (typical)– Standby Current: 5 µA (typical)

• Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks– Uniform 64 KByte overlay blocks

• Fast Erase and Byte-Program:– Chip-Erase Time: 35 ms (typical)– Sector-/Block-Erase Time: 18 ms (typical)– Byte-Program Time: 7 µs (typical)

• Auto Address Increment (AAI) Programming– Decrease total chip programming time overByte-Program operations

• End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin in AAI Mode

• Hold Pin (HOLD#)– Suspends a serial sequence to the memorywithout deselecting the device

• Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register

• Software Write Protection– Write protection through Block-Protection bits instatus register

• Temperature Range– Commercial: 0°C to +70°C– Industrial: -40°C to +85°C

• Packages Available– 8-lead SOIC (200 mils)– 8-contact WSON (6mm x 5mm)

• All non-Pb (lead-free) devices are RoHS compliant