ATA6570-GNQW1 

Features 特征

ISO 26262 Functional Safety Ready • High-Speed CAN Transceiver Fully Compliant to ISO 11898‑2, ISO 11898‑5, ISO 11898‑6, ISO 11898‑2:2016 and SAEJ 2962‑2 • Autonomous Bus Biasing According to ISO 11898‑2:2016 • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI) • Standard CAN Data-Rate up to 1 Mbit/s and CAN FD Data-Rate up to 5 Mbit/s (CAN FD) • 4 Mbit/s SPI Interface • Differential Bus Receiver with Wide Common-Mode Range • Very Low Current Consumption in Sleep and Standby Mode with Full Wake‑up Capability • Power-Down of the Complete Node via the INH-Output (Switching Off External Voltage Regulator(s)) • Six Operation Modes: – Power Off mode – Microcontroller Reset mode – Sleep mode – Standby mode – Normal mode – Overtemp mode • Four Wake-up Sources: – Local wake-up via pin WAKE – Remote wake-up pattern according to ISO 11898‑2:2016 – Remote wake-up frame according to ISO 11898‑2:2016 (selective wake-up) – Host wake-up via SPI • Wake-up Source Recognition • Transceiver Disengages from the Bus In Overtemperature and Low-Power Supply Mode • RXD Recessive Clamping Detection • Transmit Data (TXD) Dominant Time-out Function • Undervoltage Detection on VS, VCC and VIO Pins • Overtemperature Protection • 3.3V to 5V Microcontrollers can be Interfaced Directly via the VIO Pin • Battery Supply and CAN Bus Pins Protected Against Transients According to ISO 7637 • High Electrostatic Discharge (ESD) Handling Capability on the Bus Pins • Bus Pins Short-Circuit Protected to GND and VCC • VS Operating Voltage up to 28V, VS DC Supply Voltage up to 40V • Watchdog with Independent Clock Source • Watchdog can be Operated in Window and Time-out Mode: – Optional cyclic wake-up in Watchdog Time-out mode – Watchdog automatically re-enabled when wake-up event captured – Watchdog period-selectable – Watchdog Reset period-selectable.AEC-Q100 and AEC-Q006 Qualified • Two Ambient Temperature Grades Available: – ATA6570-GNQW1 and ATA6570-GCQW1 up to Tamb = +125°C – ATA6570-GNQW0 and ATA6570-GCQW0 up to Tamb = +150°C • Fulfills the OEM “Hardware Requirements for CAN Interfaces in Automotive Applications”, Rev. 1.3 • Fulfills the OEM “Requirements for Partial Networking”, Rev. 2.2 • 14-Lead SOIC Package and 14-Lead VDFN Package with Wettable Flanks (Moisture Sensitivity Level 1)

ISO 26262功能安全就绪•高速CAN收发器完全符合ISO 11898-2、ISO 11898-5、ISO 11898‑6，ISO 11898‑2:2016和SAEJ 2962‑2•根据ISO 11898‐2:2016的自主总线偏置•低电磁发射（EME）和高电磁抗扰度（EMI）•高达1Mbit/s的标准CAN数据速率和高达5Mbit/s的CAN FD数据速率（CAN FD）•4Mbit/s SPI接口•具有宽共模范围的差分总线接收器•睡眠和具有完全唤醒功能的待机模式•通过INH输出关闭整个节点的电源（关闭外部电压调节器）•六种操作模式：–电源关闭模式–微控制器重置模式–睡眠模式–待机模式–正常模式–过热模式•四种唤醒源：–通过引脚Wake本地唤醒–根据ISO的远程唤醒模式11898-2:2016–根据ISO 11898‑2:2016的远程唤醒框架（选择性唤醒）–通过SPI的主机唤醒•唤醒源识别•T.

AEC-Q100和AEC-Q006合格•提供两种环境温度等级：–ATA6570-GNQW1和ATA6570-GCQW1最高Tamb=+125°C–ATA6570-GNQW0和ATA6570-GCQW0最高Tamb=+150°C•满足OEM“汽车应用中CAN接口的硬件要求”，第1.3版•满足OEM“部分联网要求”，版本2.2  •14引线SOIC封装和14引线VDFN封装，带可湿法兰（湿度敏感等级1）

ATA6570-GNQW1 

Features 特征

ISO 26262 Functional Safety Ready • High-Speed CAN Transceiver Fully Compliant to ISO 11898‑2, ISO 11898‑5, ISO 11898‑6, ISO 11898‑2:2016 and SAEJ 2962‑2 • Autonomous Bus Biasing According to ISO 11898‑2:2016 • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI) • Standard CAN Data-Rate up to 1 Mbit/s and CAN FD Data-Rate up to 5 Mbit/s (CAN FD) • 4 Mbit/s SPI Interface • Differential Bus Receiver with Wide Common-Mode Range • Very Low Current Consumption in Sleep and Standby Mode with Full Wake‑up Capability • Power-Down of the Complete Node via the INH-Output (Switching Off External Voltage Regulator(s)) • Six Operation Modes: – Power Off mode – Microcontroller Reset mode – Sleep mode – Standby mode – Normal mode – Overtemp mode • Four Wake-up Sources: – Local wake-up via pin WAKE – Remote wake-up pattern according to ISO 11898‑2:2016 – Remote wake-up frame according to ISO 11898‑2:2016 (selective wake-up) – Host wake-up via SPI • Wake-up Source Recognition • Transceiver Disengages from the Bus In Overtemperature and Low-Power Supply Mode • RXD Recessive Clamping Detection • Transmit Data (TXD) Dominant Time-out Function • Undervoltage Detection on VS, VCC and VIO Pins • Overtemperature Protection • 3.3V to 5V Microcontrollers can be Interfaced Directly via the VIO Pin • Battery Supply and CAN Bus Pins Protected Against Transients According to ISO 7637 • High Electrostatic Discharge (ESD) Handling Capability on the Bus Pins • Bus Pins Short-Circuit Protected to GND and VCC • VS Operating Voltage up to 28V, VS DC Supply Voltage up to 40V • Watchdog with Independent Clock Source • Watchdog can be Operated in Window and Time-out Mode: – Optional cyclic wake-up in Watchdog Time-out mode – Watchdog automatically re-enabled when wake-up event captured – Watchdog period-selectable – Watchdog Reset period-selectable.AEC-Q100 and AEC-Q006 Qualified • Two Ambient Temperature Grades Available: – ATA6570-GNQW1 and ATA6570-GCQW1 up to Tamb = +125°C – ATA6570-GNQW0 and ATA6570-GCQW0 up to Tamb = +150°C • Fulfills the OEM “Hardware Requirements for CAN Interfaces in Automotive Applications”, Rev. 1.3 • Fulfills the OEM “Requirements for Partial Networking”, Rev. 2.2 • 14-Lead SOIC Package and 14-Lead VDFN Package with Wettable Flanks (Moisture Sensitivity Level 1)

ISO 26262功能安全就绪•高速CAN收发器完全符合ISO 11898-2、ISO 11898-5、ISO 11898‑6，ISO 11898‑2:2016和SAEJ 2962‑2•根据ISO 11898‐2:2016的自主总线偏置•低电磁发射（EME）和高电磁抗扰度（EMI）•高达1Mbit/s的标准CAN数据速率和高达5Mbit/s的CAN FD数据速率（CAN FD）•4Mbit/s SPI接口•具有宽共模范围的差分总线接收器•睡眠和具有完全唤醒功能的待机模式•通过INH输出关闭整个节点的电源（关闭外部电压调节器）•六种操作模式：–电源关闭模式–微控制器重置模式–睡眠模式–待机模式–正常模式–过热模式•四种唤醒源：–通过引脚Wake本地唤醒–根据ISO的远程唤醒模式11898-2:2016–根据ISO 11898‑2:2016的远程唤醒框架（选择性唤醒）–通过SPI的主机唤醒•唤醒源识别•T.

AEC-Q100和AEC-Q006合格•提供两种环境温度等级：–ATA6570-GNQW1和ATA6570-GCQW1最高Tamb=+125°C–ATA6570-GNQW0和ATA6570-GCQW0最高Tamb=+150°C•满足OEM“汽车应用中CAN接口的硬件要求”，第1.3版•满足OEM“部分联网要求”，版本2.2  •14引线SOIC封装和14引线VDFN封装，带可湿法兰（湿度敏感等级1）